Choosing between blackout vs daylight blinds sounds simple until you start thinking about how each room is used. A bedroom that needs to be dark at six in the morning in June has different demands from a kitchen where you want soft natural light and some privacy. The right answer is often not one or the other for the whole house, but a considered choice room by room.
This guide explains what each type does, where it works best, the limitations that catch people out and the practical points to check before ordering. It draws on the made to measure approach used by Jordans Sunblinds and Shutters in Hull, whose roller blinds are available in a wide range of fabrics and operating systems.
What Do Blackout and Daylight Blinds Mean?
Both terms describe the fabric used rather than the style of blind. A roller, pleated or vertical blind can often be supplied in either type.
Blackout Blinds
Blackout fabric is dense or coated so that almost no light passes through. The aim is to make a room as dark as possible during the day. In practice, a blind rarely achieves total darkness on its own, because light can still escape around the edges of the fabric and through any gaps at the sides, top or bottom.
Daylight Blinds
Daylight blinds, sometimes called light filtering blinds, use a thinner or more open fabric. They soften sunlight, reduce glare and give some privacy, but the room stays bright. At night, with the lights on, the fabric may be translucent from outside, so privacy is lower after dark unless you add curtains or choose a heavier weave.
The Middle Ground
Some fabrics sit between the two and are often called dim-out or room darkening. They block much of the light without aiming for full blackout. If you are unsure, ask to see samples held against a window in daylight, because the difference is easier to judge in person than from a description.
Blackout vs Daylight Blinds Compared
The table below summarises the main differences.
| Feature | Blackout Blinds | Daylight Blinds |
|---|---|---|
| Light Blocked | Block nearly all light, apart from gaps around the edges. | Filter some light while allowing a softer glow into the room. |
| Glare Control | Excellent | Good |
| Privacy by Day | Very high | Good, although shapes may remain visible. |
| Privacy at Night | Very high | Lower when indoor lights are switched on. |
| Room Brightness | Creates a dark room when fully closed. | Maintains a bright room with natural light. |
| Best Rooms | Bedrooms, nurseries and media rooms. | Living rooms, kitchens and offices. |
| Main Limitation | Some light may leak through gaps around the edges. | Does not provide sufficient darkness for sleep. |
When Blackout Blinds Make Sense
Bedrooms and Shift Workers
Light affects sleep, and early summer sunrise comes before many people want to wake. People who work nights and sleep during the day often need a room that stays properly dark. Blackout fabric is the natural choice here, particularly in east facing rooms that catch the first sun.
Nurseries and Children’s Rooms
Darkening a room can help young children nap and settle in the evening when it is still light outside. If you fit blinds in a child’s room, pay close attention to cord safety. Young children can be strangled by looped cords and chains, so keep cords out of reach, move beds and cots away from window coverings, and consider cordless, spring or motorised options.
Media Rooms and Home Cinemas
A screen is hard to watch when sunlight falls across it. Blackout blinds give strong control over reflections and let you watch a film in the afternoon.
When Daylight Blinds Make Sense
Living Rooms and Kitchens
These rooms are used mostly during daylight, and you probably want to see the garden and enjoy natural light. A light filtering fabric cuts the harshest glare and protects furnishings from fading without making the room feel closed in.
Home Offices
A monitor is difficult to read when sunshine hits it directly, but a very dark room can be tiring to work in. Daylight fabrics reduce glare while keeping the workspace bright, which is usually a better fit than blackout for a desk.
Rooms Facing North
North facing rooms receive less direct sun, so the main need is often privacy and gentle diffusion rather than blocking light. Heavy blackout fabric can make these rooms feel gloomy, so a lighter material is usually preferable.
Dealing With Light Gaps
Even a good blackout blind may let light in at the edges, which can surprise people who expected complete darkness. There are several ways to reduce this.
- Fit outside the recess: mounting the blind on the wall or frame so the fabric overlaps the window opening reduces side gaps.
- Choose side channels or a cassette: some systems enclose the fabric edges or the roller to limit leakage.
- Add curtains: curtains over a blackout blind give both layers of control and extra insulation.
- Consider a drill-free option: Perfect Fit blinds fit within the window frame without drilling, which suits uPVC windows, though gap control differs from a wall mounted blind.
Measurements need to be accurate for any of these to work. A made to measure blind fitted to your exact window will leave smaller gaps than a standard size cut down to fit.
Heat, Glare and Energy
Blinds also affect temperature. Blackout and reflective fabrics can reduce solar heat gain, which helps in south facing rooms and conservatories. Some roller blind fabrics carry a solar protective coating that reflects light to keep rooms cooler. Jordans lists this type of fabric among its roller blind options.
An internal blind has limits, though. It stops light after it has already passed through the glass, so some heat remains in the room. Blocking sun before it reaches the window is more effective, which is why external shading such as awnings can work well alongside blinds on very sunny elevations.
Operation and Safety
Blinds can be operated by chain, spring mechanism or electric motor. Electric and battery powered options are useful for large or hard to reach windows, and some can be controlled by remote, app or voice assistants. They also avoid trailing cords, which helps in homes with young children.
Whichever system you choose, follow safety guidance on cords and chains. Never tie cords together, ensure loops cannot twist into a hazard and keep furniture away from window coverings.
How to Decide
A few questions usually settle the choice.
- Is the room mainly used by day, at night, or both?
- Does anyone need darkness to sleep or work shifts?
- Is glare on a screen a problem?
- How important is privacy after dark?
- Do you want to add curtains to the blind?
- Which direction does the window face?
For many households the answer is a mix: blackout in bedrooms and nurseries, daylight in the kitchen and living areas, and a dim-out fabric where you want a compromise. The wider range of blinds offered by Jordans shows the styles that can be paired with different fabrics.
Next Steps
Blackout and daylight blinds suit different jobs, and the best result usually comes from matching the fabric to each room. Looking at samples in the room itself, at the times of day you use it, makes the choice clearer than comparing descriptions.
If you would like to see fabrics, discuss measuring or ask about options for your home in Hull, you can contact Jordans Sunblinds and Shutters to arrange a free estimate. You can also read more about the company and its range on the Jordans of Hull.
Frequently Asked Questions
Are blackout blinds completely dark?
Not on their own. The fabric blocks almost all light, but gaps at the edges can let some through. Fitting the blind beyond the recess, using side channels or adding curtains reduces the problem.
Can daylight blinds give me privacy?
During the day, yes. At night, with lights on indoors, the fabric can be translucent from outside, so you may want a heavier fabric or curtains for evening privacy.
Which is better for a bedroom?
Blackout is usually the better choice if you want darkness for sleep, particularly in summer or on east facing windows. Some people prefer a dim-out fabric as a compromise.
Can I use both blackout and daylight blinds in one room?
Yes. A double roller arrangement, with one daylight and one blackout blind, gives control over both light and privacy. Ask about space and fitting requirements first.
Do blackout blinds keep a room cooler?
They can reduce solar heat gain, but they work after sunlight has entered the glass. External shading is more effective for heat control, and a reflective fabric helps further.


























